Evaluation of the Convective Heat Transfer Coefficient for Minimum Quantity...
AbstractPurpose - Purpose – To evaluate the cooling ability of minimum quantity lubrication (MQL) cutting fluid.Design/methodology/approach - Design/methodology/approach- An experimental system is...
View ArticleDry sliding wear behaviour of Aluminium/alumina/graphite Hybrid Metal Matrix...
AbstractPurpose - Recent trends in material science show a considerable interest in the manufacturing of metal matrix composites to meet the stringent demands of lightweight, high strength and...
View ArticleInvestigation of Oil and Emulsion Stability of Locally Prepared Metalworking...
AbstractPurpose - Cutting fluids play a significant role in machining operations and impact shop productivity, tool life and quality of work. When properly applied, cutting fluids can increase...
View ArticleFluorinated Interactions in two Different Plain ZDDP oils Using Design of...
AbstractPurpose - Friction and wear performance of two plain ZDDP oils were studied in the presence of fluorinated catalyst and PTFE combinations under extreme boundary lubrication of 385 Newton load...
View ArticleExperiments on effects of dust particles on the wear of cylinder liner in...
AbstractPurpose - This paper seeks to study the effect of particles on the wear of cylinder liner in internal combustion engine under some typical weather conditions.Design/methodology/approach -...
View ArticleTribological behaviors of novel tri(hydroxymethyl)propane esters containing...
AbstractPurpose - The aim of this paper is to study the tribological performance of tri(hydroxymethyl)propane esters containing boron and nitrogen as lubricant additives in rapeseed...
View ArticleStudy on variation of tribo-performance of commercial engine oils.
AbstractPurpose - To study the performance variability of commercially available engine oils based on Physico-chemical and Tribological performance parameters. Design/methodology/approach - By...
View ArticleStatic performance characteristics of hybrid journal bearings with plugged...
AbstractPurpose - This paper investigates the effect of plugging of holes on the static performance characteristics of a constant flow valve compensated hole-entry hybrid journal bearing system...
View ArticleEffects of non-Newtonian Rabinowitsch fluids in wide parallel rectangular...
AbstractPurpose - In the present paper, we analyze the non-Newtonian effects of Rabinowitsch fluids on the squeeze film performances between wide parallel rectangular plates.Design/methodology/approach...
View ArticleThe tribological behaviour of Fe-C-Al cast iron – Effect of temperature
AbstractPurpose - The aim of this paper is to study the tribological behaviour of Fe-C-Al cast iron at different temperatures using universal pin-on-disk machine. Design/methodology/approach - The cold...
View ArticlePattern recognition based surface roughness prediction in turning Hybrid...
AbstractPurpose - Surface roughness prediction using pattern recognition for the Aluminium Hybrid Metal Matrix Composite (HMMC).Design/methodology/approach - Hybrid composites were manufactured using...
View ArticleFriction heat conduction and entransy of friction lining
AbstractPurpose - This paper aims to analyze the friction heat conduction and entransy of two friction linings in the high-speed slide accident of a mine friction hoist.Design/methodology/approach -...
View ArticleMeasurement of Oil Film Thickness between Piston Ring and Liner Using Strain...
AbstractPurpose - The aim of this paper is to develop a technique to measure the oil film thickness between piston ring and liner throughout the stroke, without impairing the surface properties of the...
View ArticleMaterials flow for different lubricants during cold forming
AbstractPurpose - Barreling contour variations on the free surfaces of cylindrical upset specimen are to handle measuring for different upsetting reductions and different lubrication conditions in this...
View ArticleA Comparison of Two Minimum Quantity Lubrication Delivery Systems
AbstractPurpose - Compare the performance of single and dual-channel MQL for reaming spool bores in an automotive transmission valve body. Design/methodology/approach - Machining experiments are...
View ArticlePreparation and tribological properties of surface-modified calcium borate...
AbstractPurpose - To develop a potential substitute for conventional lubricant additive and improve the oil-solubility of nanoparticles, calcium borate nanoparticles modified by an eco-friendly or...
View ArticleAntifriction Property of Surface Patterning Nano-hard film on the...
AbstractPurpose - There types of pattern on the monocrystalline silicon surface were prepared by using laser surface processing equipment. The DLC film and Si-DLC film on the patterning surface were...
View ArticleChemical mechanical polishing of steel substrate using aluminum nanoparticles...
AbstractPurpose - Chemical mechanical polishing (CMP) has attracted much attention recently because of its importance as a nano-scale finishing process for high value-added large components which are...
View ArticleEffects of Reciprocating Motion Parameters on Lubricating Properties of...
AbstractPurpose - This paper aims to clarify the effects of the reciprocating motion parameters on the lubricating performance of the tripod sliding universal joint (TSUJ). These parameters mainly...
View ArticleWear Behaviour of Ti6Al4V Alloy Blasted with Zirconia/Hydroxyapatite Powders
AbstractPurpose - Purpose – The purpose of this paper is to investigate the effect of blasting treatment with Zirconia/Hydroxyapatite powders on the surface roughness, in vitro bioactivity and wear...
View Article
